The MAC Aura is the first compact LED moving head wash light with zoom that offers never-before-seen, eye-candy aura effects yet also functions as a highly capable single-lens wash with fully pre-mixed color. A ground-breaking optical system combines multicolor LEDs with backlight aura color mixing to produce an all new visual palette that takes the synthetic look out of LED for truly unique lighting designs. |
|
Features | |
|
Physical |
Length: 302 mm (11.9 in.) across yoke |
Width: 302 mm (11.9 in.) across yoke |
Height: 360 mm (14.2 in.), head straight up |
Weight: 5.6 kg (12.3 lbs.) without accessories |
Dynamic Effects |
Beam color mixing: RGBW |
Aura (secondary lens array illumination) color mixing: RGB |
Beam color temperature control: CTO, variable 10 000 - 2500 K |
Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color |
Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects |
Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined |
Electronic dimming: Independent beam and aura, four dimming curve options |
Zoom: 11° - 58° (one-tenth peak angle) |
Pan: 540° |
Tilt: 232° |
Pan and tilt speed: Adjustable via onboard control panel and DMX |
Control and Programming |
Control options: Independent control of beam (primary output) and aura (secondary lens array illumination) |
Macro programs selectable via DMX: Synchronized beam and aura effects |
Control: DMX |
RDM: Implemented |
Control resolution: 8-bit, with 16-bit control of pan & tilt |
DMX channels: 14/25 |
Setting and addressing: Control panel with backlit graphic display |
Protocol: USITT DMX512-A, ANSI/ESTA E1.20 RDM |
Transceiver: RS-485 |
Fixture software update: Via DMX with Martin USB Duo DMX Interface |
Optics |
Light source: Osram Ostar high-power emitters |
LED refresh rate: Beam 1220 Hz, aura 4395 Hz |
Minimum LED lifetime: 50 000 hours (to >70% luminous output)* |
*Manufacturer´s figure obtained under manufacturer´s test conditions |
Photometric Data |
Total output: 3850 lumens (zoom at maximum) |
Construction |
Color: Black |
Housing: High-impact flame-retardant thermoplastic |
Protection rating: IP20 |
Installation |
Mounting points: One M12 threaded hole for rigging clamp |
Location: Indoor use only, must be fastened to surface or structure |
Orientation: Any |
Minimum distance to combustible materials: 100 mm (3.9 in.) |
Minimum distance to illuminated surfaces: 200 mm (7.9 in.) |
Connections |
AC power input: Neutrik PowerCon |
AC power throughput: Neutrik PowerCon |
DMX and RDM data in/out: 5-pin locking XLR |
Electrical |
AC power: 100-240 V nominal, 50/60 Hz |
Maximum total power consumption: 260 W |
Power supply unit: Auto-ranging electronic switch mode |
Main fuse: 5 AT (slow blow) |
Typical power consumption, all effects static, zero light output: <15 W |
Typical Power and Current |
100 V, 60 Hz: 236 W, 2.4 A, PF 0.994 |
120 V, 60 Hz: 234 W, 2.0 A, PF 0.992 |
208 V, 60 Hz: 229 W, 1.2 A, PF 0.970 |
230 V, 50 Hz: 228 W, 1.1 A, PF 0.959 |
240 V, 50 Hz: 228 W, 1.0 A, PF 0.953 |
Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%. |
Thermal |
Cooling: Forced air (temperature-regulated, low noise, user-definable levels) |
Maximum ambient temperature (Ta max.): 40° C (104° F) |
Minimum ambient temperature (Ta min.): 5° C (41° F) |
Total heat dissipation (calculated, +/- 10%): 880 BTU/hr. |